The Best Saab 9-3 Key Replacement Experts Are Doing Three Things > 자유게시판

how to get a saab replacement key to Replace the Replacement Key Battery For the saab key Battery 9-3

Saab owners have to follow a series of unique steps to add a second ignition key. It requires dealer service using the handheld computer known as Tech-2. Then a new key as well as transponder must be purchased and then programmed to the car.

Rotate your keys to prevent one from wearing out more than the other. This will keep your keys in pristine condition.

Replacement Case

As opposed to the traditional saab car keys keys of the past keys, the modern key fobs are equipped with electronics which makes it more difficult to copy. That has made car theft considerably more complicated than it was 20 years ago. But, it has also made replacing lost keys an incredibly expensive task.

Saab 9-3 owners must have two working keys. It is expensive to replace a lost key, as it requires replacing the CIM module, as well as programming the locking cylinders. Dealers charge between $100-$200 to do this.

There are ways to avoid these high costs. Some parts providers will use the code of an extra key to cut a brand new metal blade for a fraction of what the dealer charges. The key, however, must be the same as the original one in order to function in your vehicle.

Follow these steps to replace the case. You will need a flathead screwdriver as well as some patience. With the screwdriver, slowly pull the plastic apart and then separate the emergency key from the case. Once the case is opened, take out the electronics and place them into your new case. Be sure to put the correct key and badge back in the case too.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced easily and quickly. Cyclone's YouTube video Cyd demonstrates how to replace the battery of the remote fob with only four steps. This tutorial should work for any modern-day saab key fob however, the procedure may differ slightly.

The button is normally located close to the Saab logo on the back of the fob. This button is usually located on the back of your fob, close to the saab 93 key replacement Logo. Use a flathead screwdriver to insert the screwdriver through the small hole in this button. This should be sufficient to allow you to open the fob case so that you can replace the battery.

After the new battery CR1632 is installed, you can reassemble the remote key fob and then program it to your car. The entire process shouldn't take more than one hour. This is a simple procedure that doesn't require special tools.

If you lose your key, the procedure will be somewhat more complex however, it can be completed. The dealer must find the VIN number of the car and then purchase a replacement key blade and TWICE module, both with the exact unique code. The dealer will then have to program the key using MDI an innovative software tool.

Replacement Key Fob

The key fob is the device that locks and unlocks your car. It has batteries inside. The batteries have a lifespan and eventually fail. This is a problem that occurs for all vehicles. The good thing is that you can replace the battery in all key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronic components in place. You can simply open the case and replace the batteries. It is important to keep in mind that you'll have to remove the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot in the middle of the case. The case will split as you move the screwdriver around it.

If you're looking to replace your keys, have a spare on hand. This will save you a significant amount of money. If you do have a spare, you can have the dealer cut the new key and program it to your car, which is much cheaper than replacing the entire key fob.

If you don't have a spare you can add an additional key to your car, however this will require a lot of research and effort. It costs around a hundred dollars to add an additional car key. The computer in the car also needs to be programmed. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

The latest SAAB 9-3 features a more sophisticated alarm system built on a keycode. If you lose your sole key, it can be costly to purchase a new one because the car must have a special computer added and be programmed to accept a brand new key. Most locksmiths cannot do this and even a dealer will charge several hundred dollars just to program the new key!

Dealers will charge you a premium to replace your car's computer (also called the CIM or SAAB twice) when you lose your only working key. Instead, we can reprogram the EEPROM in your current car computer to prepare it to accept a second key, and save you over 50% of what you'll pay at a dealership.

If you've been a faithful owner of a 03-11 SAAB 9-3, then you likely know that the ignition key isn't very robust. If your ignition key isn't functioning properly, it is time to consider replacing it. They can become extremely sticky and the buttons have been known to fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it is able to be accomplished quickly.